Barrett REC7 DMR Gen II Black 5.56 18-inch 30Rds




Buy Barrett REC7 DMR Gen II Black 5.56 18-inch 30Rds Online


Barrett REC7 DMR Gen II Black 5.56 18-inch 30Rds, Barrett rec7, the TB-41 DLC coated, anti-tilt, full auto bolt carrier is machined from a solid block of 8620 steel with an integrated piston strike face. It’s magnetic-particle inspected and proof tested before leaving the factory. Both upper and lower receivers are forged from 7075-T6 aluminum, Type 3 Class 2 hardcoat anodized for durability, then finished with Cerakote for a perfect color match. The upper receiver and barrel extension feature M4 feed ramps for improved reliability, while the lightweight, free float handguard features a full-length M1913 Picatinny top rail with Magpul M-LOK accessory mounting slots at the 3, 6, and 9 o’clock positions.

Unlike possible replacements for the M16/M4 such as the now canceled XM8, the REC7 is not an entirely new rifle, instead it is made up of an upper receiver that is attached to a M16/M4 lower receiver and is compatible with many accessories intended for the M16/M4 family. It can also be mated to M16/M4 lower receivers currently in the possession of the US military. The rifle uses a short-stroke gas piston mechanism, unlike the M16 or M4 which use direct impingement.

In addition, the REC7 uses the new 6.8mm Remington SPC (6.8×43mm) cartridge, a round that is of roughly equivalent length to 5.56×45mm NATO ammunition, so it is compatible with a standard-size lower receiver currently in use by the United States military.

The REC7 uses a short-stroke gas piston designed by Barrett. It rides above the barrel and is housed inside the fore-end. The spring-loaded piston is a one-piece 17-4 stainless steel rod. The forward and rearward movement of the piston is approximately one inch.

Like many AR-15 type rifles, such as the M16/M4, the barrel is threaded to allow muzzle attachments such as a suppressor. The REC7 employs a free-floating Daniel Defense rail system,[2] which allows many military accessories such as a bipod, night vision devices, and combat optics to be placed on the rifle. The REC7 features forged 7075 aluminum upper and lower receivers that are hard-coat anodized a deep black.[3] The lower receiver has a single-stage trigger, a Magpul enhanced trigger guard for firing with gloves, and a beveled magazine well for rapid magazine changes.[2] The upper receiver is flat-top with a Picatinny rail. The barrel is chrome-lined and is fitted with a M16A2 flash suppressor, a six-position Magpul MOE butt stock and pistol grip.[3]


  • Barrel Length: 18″ (45.7 cm) Barrel
  • Twist Rate: 1 in 7.7″ (19.6 cm)
  • Operation: Gas Piston System; Semi-Automatic
  • Weight: 7.91 lbs. (3.59 kg) DMR
  • Rail / Handguard Types: Barrett Enhanced Rail featuring KeyMod
  • Stock Type: MagPul® MOE 6 Position
  • Overall Length: 38.25″ (97.6 cm) DMR


There are no reviews yet.

Be the first to review “Barrett REC7 DMR Gen II Black 5.56 18-inch 30Rds”

Your email address will not be published.